Auto Brick

JKY75/65EII-4.0

Product description

JKY75/65E-4.0 model Hard Plastic Double Stage Vacuum Extruder with a large model designed and manufactured according to Italian technology.

Its material receiving reamer diameter with 750mm, extrusion reamer diameter with 650mm, matched with stronger power, advanced planetary gearbox, output, extrusion pressures are greatly improved, the degree of vacuum with ≤-0.092Mpa. Suitable for shale, coal gangue, fly ash, tailings, and other producing porosity, a large section of hollow blocks, insulation bricks, decorative bricks and etc. Annual output of more than 120 million pcs (standard brick), energy-saving more than 30%, efficient higher than 30%.

JY75D-4.0

Product description

el Hard Plastic Double Stage Vacuum Extruder is designed and manufactured according to U.S. technology.

Hourly capacity with 22000~38000pcs (standard brick), adopted hard tooth face gearbox, warranty with 3 years.

JY75CII-4.0

Product description

JY75 CII-4.0 model Hard Plastic Double Stage Vacuum Extruder designed and manufactured according to U.S. technology. Hourly capacity with 22000~35000pcs (standard brick), adopted hard tooth face gearbox, warranty with 3 years.

Energy-saving more than 30%, efficient higher than 30%.

JKY60-4.0

Product description

It is applicable to the desert mountain clay, shale, fly ash, coal gangue brick of extrusion molding, and suitable for annual capacity of more than 50 million pieces solid standard brick factory production.

JKY55-4.0

Product description

It is applicable to the desert mountain clay, shale, fly ash, coal gangue brick of extrusion molding, and suitable for an annual capacity of more than 50 million pieces solid standard brick factory production.

JKB50-3.0

Product description

It consists of a reducer driving system, up-stage mixing extruder, down-stage forming extruder, vacuum chamber, vacuum system, and chassis.

The up-stage and down-stage designed with cross range, vacuum system separated from the host machine and connected through the sealing pipe.

JKR45-2.0

Product description

It consists of a reducer driving system, up-stage mixing extruder, down-stage forming extruder, vacuum chamber, vacuum system, and chassis.

The up-stage and down-stage designed with cross range, vacuum system separated from the host machine and connected through the sealing pipe.

Plate Feeder

Product description

GL series plate feeder used for transferring materials with sharp edges and stronger abrasiveness.

The chainplate has stronger bending strength and impact resistance, operation is stable, reliable, and lower noise.

Box Feeder

Product description

It is suitable for materials feeding and batching of moisture with 0 ~ 24% soft materials or hard materials particle ≤ 80 mm of brick & tile plant and other various places.

The machine adopted channel steel chassis & column, steel plate box body.

Through belt conveyor transferring materials and gear motor driving ejecting shaft to poke materials.

Coal Batching Feeder

Product description

Scale fixed in the head or under the bottom of main raw materials (clay, etc.) belt conveyor, continuously detecting the main raw materials rate of flow, the flow signal is transmitted to the microcomputer controller, batching feeder (or water dispenser) controlled by the controller, which calculates the rates of excipients (or water) according to the ratio set in advance and the main raw material flow meter, add the ingredients on a belt or into the mixer. That is the main raw materials more input, accessories plus more, less main raw materials input, plus fewer accessories, scaled automatically added.

* Increase rate of finished product and firing temperature

* Decrease probability of kiln body burning down

* Decrease fuel consumption (5% -12%) * Avoid the loss of green brick collapsing because of moisture inhomogeneous

* Decrease comprehensive production cost, increase economic efficiency

Spiral Conveyer

Product description

GS Series Double Roller Crusher

Product description

GS120x100 Double Roller Crusher is one of the crushing equipment of brick & tile, cement, mining production of raw materials. Especially for the production of brick & tile material processing with better refining and knead grinding.

The machine rollers with diameter 1200mm, adopted hard alloy roller ring with carbide hardness more than HRC50, roller ring with higher hardness, self-weight, smaller angle of material feeding, effectively squeezing and knead grinding raw materials, refining raw materials, improving its plasticity index, reducing rejection rate, increasing production capacity, ensure the quality of insulation products, benefits of the brand and economic. Applicable to all types of mid-hard (Platts Hardness 4-5) materials crushing.

Adjustable Hammer Crusher

Product description

PCX-Φ1200x1000 is an adjustable impact crusher, rotor reserved enough energy for material crushing, raw materials broken under the hammer impacting collision with the back cavity, hammer plates with a scattered cross decorated improved the chances of material impacting, achieved the purpose of material refining crushing,

The rotor with heavier self-weight, the higher force of impacting, more dust, less material returning, 30% higher production capacity than similar product, 40% energy saving with the same capacity, automatic dust reducing, hammer liner abrasion resistant, easy replacement, backplate, sieve bottom adjustable, it is the ideal equipment of crushing hard shale, coal gangue ore and etc.

Double Rotor Crusher

Product description

Double rotor hammer mill imported American technology, with designing purpose of simple maintenance, economical and durable, higher output, energy-saving, suitable for higher moisture content of soft shale.

Hammer Mill

Product description

This model specially used for the brick & tile manufacturing industry, crushing non-cohesive medium-hard (Platts Hardness <5) materials like gangue, shale, industrial residue and etc.

Hammer Crusher

Product description

The machine is suitable for grinding coal gangue, shale, limestone, and other raw materials.

Require the raw materials particle size < 150 mm and moisture content is below 10%. The machine average discharging granularity is below 3 mm, adjusting the grate plate gap can control the discharging granularity.

An appropriate increase in grate plate clearance was beneficial to the improvement of the production.

Tooth Crusher

Product description

It’s raw materials coarse crushing equipment of brick & tile, cement, minerals production. This model with twin tooth type roller assembly and compact structure. Tooth roller sleeve surface covered by wear-resistant materials, higher surface hardness, wear resistance, lower maintenance costs, higher production capacity, and lower power consumption.

Especially suitable for mud, shale, gangue, and another medium hard (Platts Hardness 4~5) materials coarse crushing.

Jaw Crusher

Product description

Mainly used for metallurgy, mining, chemical, cement, construction, refractory, ceramic and another industry medium-hard (Platts Hardness 4~5) materials intermediate and fine crushing.

Jaw crusher has the characteristics of higher crushing capacity, better uniform particle size, simple structure, reliable operation, easy maintenance, economical operating costs, etc.

Spiral Roller Derocker

Product description

Spiral roller sleeve surface covered by wear-resistant materials, higher surface hardness, wear resistance, the efficiency of stone/rock removing, lower maintenance costs, higher production capacity, lower power consumption. It's suitable for various kinds of medium-hard materials. crushing of Platts Hardness with 4 ~ 5 and stone/rock removing.

Coal Cinder Crusher

Product description

FS600x400-2 Double-stage Coal Crusher is suitable for crushing gangue and coal cinder, raw materials particle size < 100 mm, and moisture content is below 25%.

Without a screen in the bottom, so the higher moisture raw materials won’t block, and for the sieve plate pasting plugging, there are no more fines that cannot timely output and repeating grinding, so it’s higher efficiency of grinding and no more hammerhead invalid wearing situation.

Roller Screen

Product description

The machine has the characteristics of lower noise, bigger power output, higher screening efficiency, larger capacity, simple structure, non-blocking sieve, non-card screen, lower energy consumption, easy installation, simple maintenance and etc, at the same time, according to the different natures of screening materials, configuring appropriate mesh size of the screen, it will be able to well meet different screening requirements, and achieve satisfactory separation results

Vibrating Screen

Double Shaft Mixer

Product description

The machine is suitable for mixing and coarse crushing of all kinds of solid raw materials. Especially suitable for mixing and stirring of clay, shale, fly ash, and other raw materials for brick manufacturing enterprises.

With quality rigidity, large capacity, and efficient mixing, it is an ideal equipment of raw material processing for brick making.

Double Shaft Mixing Extruder

Product description

The machine is suitable for mixing all kinds of solid raw materials. Especially suitable for mixing and stirring of clay, shale, fly ash, and other raw materials for brick manufacturing enterprises.

The machine with optimization designing, quality rigidity, large capacity, and efficient mixing, it is a piece of ideal equipment for raw material processing for brick making.

Double Shaft Mixer (Heavy Duty)

Product description

Raw materials transfer into the mixing tank, cutting, extrusion, and mixing by mixing knife which fixed on the main shaft, making the raw material mixing and aging. The machine is suitable for mixing and coarse crushing of all kinds of solid raw materials.

Especially suitable for mixing and stirring of clay, shale, fly ash, and other raw materials for brick manufacturing enterprises. With quality rigidity, large capacity, and efficient mixing, it is ideal equipment for raw material processing for brick making.

Side Type Hydraulic Multi Bucket Excavator

Product description

Side Type Hydraulic Multi Bucket Excavator used multi-bucket for aging storage raw materials continues excavating, it is suitable for gangue, fly ash, shale, clay, and other loose materials excavating.

Bridge Type Multi Bucket Excavator

Product description

Bridge type multi bucket excavators are the main equipment for transferring loose materials. It’s hung in workshops upside, warehouses for materials transportation.

The main features are smaller cover area, higher capacity foraging workshop and feeding, higher efficiency, and the feeding capacity up to 160 t/h.

Light-duty program-controller cutting Machine

Product description

Light Program-controlled Pneumatic Cutting Machine

Product description

Heavy Program-controlled Pneumatic Cutting Machine

Product description

Green Black column cutting machine

Product description

This set of equipment can satisfy double mud strip extrusion speed of extruder maximum capacity [>21600 bricks (standard)/H), 117x55x245mm, 93x55x195 mm, kp1 type, blocks, modules bricks, and other dimensions brick production requirement.

Cutting machine QP220S with alarming and automatic switching function.

Green Block cutting machine

Product description

Grouping Machine( Single、Twin、Three)

Product description

Grouping Machine (Twin)

Product description

Grouping Machine (Three)

Product description

Automatic Green Brick Storage Machinery

Automatic stacking machine for rotary kiln

Product description

R&D for rotary kiln, with the characteristics of high efficiency, stability flexibility, and lower cost.

Robot stacking integrated system

Product description

As the development of times, the application of robots has been involved in many industries since its flexibility, reliability, simplicity, and favored by many manufactures & companies.

Robot stacking integrated system with loading systems with a loading capacity of 300kg, 450kg, 470kg, 500kg, 700kg, 800kg. The control part adopted an integrated structure fitted in the robot base, so that eliminated cable connection and easily set. Mechanical wrist with hollow structure, thus avoiding mechanical wrist wounded by robot cable. The robot is equipped with a variety of intelligent features with the latest high-performance controller R-J3ic control.

Xiechuang kept up with the pace of technology, imported Germany SEW gear motors servo motors, Japan SMC pneumatic components, Italy Magodi synchronous belt, the world advanced FANUC and Germany Siemens PLC bulk electronic integrated system, entered into the period of mechanical automatic intelligence.

FANUC ROBOT